Flexim is commonly used for securing ridge and hip tiles on clay roof installations.
Its flexibility and waterproof properties make it suitable for a wide range of climates.
If you are repairing or replacing clay roof tiles, we also supply new imported and reclaimed clay tiles across the U.S. and Canada.
Installed on Clay Roof Systems Across North America
Installing abutting ridge tiles with Flexim Roof Mortar
Remove the Flexim strip from the packaging.
Press the Flexim onto a clean and dry surface. The width should be at least 2". Make sure the joints are completely filled with Flexim.
Place the Ridge tile onto the Flexim and press firmly into place. Ensuring the Flexim is both inside and outside of the ridge cap, keeping the joints as tight as possible.
Remove the excess Flexim and smooth the material to achieve a uniform appearance.
Use your finger to tidy up the joints.
Installing overlapping ridge tiles with Flexim Roof Mortar
Installing hip tiles with Flexim Roof Mortar
Apply the Flexim to a clean dry surface. Width should be 2"
Place the hip tile onto the Flexim and press firmly into place.
Secure the tiles.
Remove the excess Flexim and smooth to achieve a uniform finish.
Installation Videos
Installation guide for Flexim Roof Mortar on clay tile hips and ridges.
These videos demonstrate proper installation of Flexim Roof Mortar for securing ridge and hip tiles on clay roofing systems. Always follow manufacturer guidelines and local building codes.
Demonstrates applying Flexim to secure hip tiles and achieve a clean finish.
Step-by-step example of applying Flexim to ridge tiles.
Have questions about using Flexim on your project?
Contact us for technical guidance or shipping information.
Trusted on clay roof installations since 1997.